Principle:
During the day, solar panels generate power in the sun. Through the control function, the solar panels charge the battery and automatically turn on the LED lights at night (human body induction mode, reducing power consumption) to illuminate the road through LED lights.
Composition:
It consists of an integrated lamp (built-in: high-efficiency photovoltaic modules, large-capacity
Lithium Battery, microcomputer MPPT intelligent controller, high-brightness
LED light source) and a light pole.
Purpose:
Installed on various traffic roads, auxiliary roads, residential roads, courtyards, mining areas and places where electricity is not easy to pull, park lighting, parking lots, etc. to provide road lighting at night, and solar panels charge batteries to meet lighting.
usage notice:
●. "One light" work cannot leave the sun. Please select the appropriate product model according to the solar intensity of the installation site or the total annual solar radiation.
● "All-in-one lamp" chooses long-life lithium battery as energy storage element. During the day, the charging temperature is 0°C~+60°C. When it is lower than 0°C, the control system will automatically stop charging to protect the battery. When the temperature rises above zero, it will automatically charge (control system temperature control is optional) .The discharge condition of discharge at night is -20°C~+60°C, beyond this range, the battery performance will be destroyed. Please make sure that the extreme temperature does not exceed the above conditions when choosing "all-in-one light".
●The battery of the "all-in-one lamp" can be stored for up to 1-2 months after being fully charged. After a long period of transportation or storage, it needs to be inspected in time, charged regularly and recorded. Otherwise, the battery will be damaged.
● If it is in the northern hemisphere, when installing the "integrated light", make the
Solar Panel face south as much as possible to obtain the maximum energy. If it is installed in the southern hemisphere, the solar panel faces north when installing. At the same time, it is necessary to avoid the shadow of obstacles such as houses, trees, etc., which will reduce the power generation efficiency of solar panels and cause the efficiency of the "integrated lamp" to decrease.
●. The cleanliness of the surface of the "integrated lamp" solar panel will also affect the power generation efficiency of the solar panel. Therefore, the surface (such as dust, leaves, oil stains, etc.) needs to be cleaned. It is recommended to scrub with ordinary detergents regularly.
●The lamp body is equipped with a fuse holder, please take out the insulating film in the fuse holder before use, you can use it, and a spare 5A (220V) fuse is also provided.
