When choosing
LED Lamps, everyone is undoubtedly considering that it is more energy-saving and environmentally friendly. However, under long-term use, the LED lamps are also worn out, and some faulty operations can easily damage the LED lamps. Even
Led Traffic Lights need to be well maintained and protected in order to be effective and have a longer service life.
●How to use LED lights
1. Look at the clarification book
After buying the lamp, do not be busy with the installation. Read the installation instructions carefully, and then install the lamps according to the installation instructions. Otherwise, risks may occur.
2. Do not change the structure of the lamp
Do not change the internal structure of the lamp during cleaning and protection, and do not change the parts of the lamp at will. After the protection, the lamp should be installed as it is, and no missing or wrong parts of the lamp should be installed.
3. Don't switch frequently
When using lamps, try not to switch lamps frequently. Although LED lamps can withstand switching times of about 18 times that of ordinary fluorescent lamps, excessive frequency will still affect the life of the internal electronic components of the LED lamp, and then affect the life of the lamp.
4. Prevent wetting
It is especially important to note that, except for special LED traffic lights, general LED lamps should be avoided in humid environments. Humid environment will affect the electronic components of the LED lamp driving power supply. If the electronic components are damp, the lamp life will naturally be shortened.
●Maintenance tips for LED lights
1. Moisture prevention is the key to lighting maintenance, especially for LED lights in bathrooms and baths and stove headlights in kitchens. Moisture-proof lampshades must be installed to prevent moisture intrusion, rust damage, or leakage short circuits.
2. Try not to clean the LED lamp with water as much as possible. Just wipe it with a dry cloth dampened with water. If you do not care about touching the water, try to wipe it dry as much as possible. Do not wipe it with a wet cloth immediately after turning on the light.
3. Prevent use in high temperature and high humidity environments. LED lighting fixtures are generally used when the ambient temperature is 5-40°C.
4. The inside of LED lamps is mainly driven by power supply. It is recommended that non-professionals should not assemble, disassemble and assemble by themselves to avoid the risk of electric shock.
5. The metal parts of LED lighting fixtures cannot be freely used with polishing powder and other chemical agents. The dust on the back of LED lighting fixtures should be cleaned with dry cloth or duster.
6. Check the indoor lamps and lanterns regularly, especially the chandeliers. On the one hand, check whether the line is aging, on the other hand, check whether the chandelier is suspended. The chandelier is hung in an important position or a place with a lot of people, and its stability should be good.
The use of led traffic lights is related to the problem of household electricity consumption. You can't be greedy to choose inferior products cheaply for a while, learn to use and maintain dry goods, and the lamps are more efficient!
